That was the ticket. The "new" oars work like a charm. My fingers are numb from stitching the leathers on, but this morning the wind died down so I took her down the channel to the mouth of the harbor. She rows like a dream!!
I need to tweak a few things:
1.) The oars need buttons - Turk's Heads, or leather, I haven't decided. I also need to remove a bit of material from the inside of the oarlock horns. The diameter of the oars with the leathers is a bit snug in there.
2.) I need blocks to elevate the oarlocks about 1" - 1 1/4". My return stroke is a bit wonky, and a small change will go a long way. I have some beautiful locust scrap for these.
3.) Depending on how she feels after making and installing the aforementioned blocks, I may make a new thwart to move myself forward an inch or two (see below).
4.) Some kind of rack for an adjustable foot rest is in order. Frames in a traditional faering are spaced a bit closer together (35-ish inches vs. Valgerda's slightly larger dimension - I have not measured it recently, but recall it at about 38") so that a rower can brace his feet aginst them. As things are now, in order to brace my feet against the frame, my torso interferes with the end of my pull. A foot rest may also eliminate the need for for moving the thwart forward.
As you can imagine, with the exception of the first item, all of the above changes affect each other. Trouyble-shooting 101 says that one should change one item in a system at a time and check results. This holds especially true here.
I don't want to change the geometry too much to suit my rowing technique as I fear I may lock myself into some bad habits. I have never rowed any real distance before. Obviously I have rowed out to a mooring numerous times, but these distances were a matter of a few hundred yards or less. I have never rowed any "quality" craft other than a brief excursion on a sliding seat shell, in which I was a danger to myself and others, and a few mornings on my father-in-law's Gloucester Light Dory. As with anything worth doing, I will need lots of practice before I can begin to do it "right."
If anyone in the Cape Ann area wants to come down and offer some coaching, I'll be happy to get the input.
I'll keep her in the water for another week or two, and she'll get hauled for the winter.
I'd like to continue with building the rig, rudder, hardware, and other remaining items, but I'll need to take a hiatus from the Dark Secret project to get some other stuff done over the winter.
The Thistle needs to have her centerboard trunk out and back in, as well as a significant amount of finish work, Strider's re-power and topsides projects need to get wrapped up (there are many more winters' worth of work to do on her before she is done, but I need to get her back in the water next year), and, most importantly, I have to get a short list of projects done at the house so that my wife doesn't kill me. She has been extremely patient through this project and I don't want to blow it with her by de-prioritizing real priorities.
My hope is that by carefully managing my time I'll be able to get all of it done. I'd like to do the Small Reach Regatta next year with Dark Secret, but there are never enough hours in the day. Something has to give. If I need to back-burnerize anything on the list, it will be the Thistle.
I am hoping to conscript someone to get a few shots of Dark Secret underway. We'll see how that works out...
Sunday, October 24, 2010
Monday, October 18, 2010
Modification of the situation


After having rowed Dark Secret with oars that were way too short, I decided to rectify the situation. At one point I was told, "I've got a long pair of oars in the garage that you're welcome to use." People have become so accustomed to the crappy short oars that are sold these days that a 7 1/2' pair seems long.
I made a piar of oars about ten years ago. The were for a tender that I used for getting out to a boat I used to own. The oars were about 6 1/2' long, crudely spooned and way too clunky. They were so miserable in hand that the only use they ever really got was as curtain rods in the house I rented in East Gloucester.
They are made of local spruce, obtained as a "staging plank" at my local lumber yard. I had a chunk of native spruce left over from getting out the spar blanks for Dark secret, so I figured that I'd make the best of things and cobble something together.
I lopped off the handles and cut a nice long scarph (16:1) on the bandsaw. I cut matching scarphs in the new loom blanks, dry fit things together a few time to get the run just so, and glued them together. I let them sit overnight and began shaping them the next morning. They came out pretty decent for the comparatively little bit of time I have in them.
I took lots of material out of the looms, particularly near the blades, and I lightened up the blades as much as I felt I could. My goal was to get the balance point as far inboard as I could. I may have to let in a small chunk of lead to get it where I want it.
The stock I had on hand limited my overall length to 9' 8". I'd like to have been able to go longer, but Manchester harbor is pretty tight. I'm concerned about getting through the mooring field with my 19' 4" beam (9'8" x2), let alone the 22' or so that I had as a target.
I'm building up finish on them during the next few evenings, and getting some more varnish on the boat, too. I'm going to re-launch at the tail end of the week and then call it a season.
More photos soon, as well as feedback on rowing with better oars.
Monday, October 11, 2010
Made it by the skin of my teeth.




I pulled it off. A few marathon days, a couple of pounds of coffee (more than a few adult beverages) and quite a bit of slogging through some pretty tedious, but necessary, tasks and I got Dark Secret in the water. I got her in on this afternoon's tide.
It would have been sooner, but I had an incident with the varnish on the sheerplank. I masked the rail for stain and sealer. When I pulled the tape I lost a bit of varnish. DO NOT USE FINELINE TAPE ON VARNISH. I misunderstood the instructions from Kathy, the varnish queen at Manchester Marine. I was only supposed to use the fineline tape along the edge where the transition from stain to natural occurs. Chalk that one up to experience. Fortunately, the stain was not disrupted, so I was able to repair the edge of the varnish and apply a few build-up coats. I'll block the whole thing down flat when she gets final finishes.
But that's enough negativity. What a great day!!! I got up early and handled the last batch of pre-launch punch list items. I gave the ballast/keel joint a final once-over to fair everything in, hit a coat of red lead on any bare spots, and then hit them with bottom paint. I assembled the floor boards (I LOVE the way the stain turned out on them) and seats. I rigged up a quick sling so that I could launch with the fork truck, and then I went home for breakfast and to wait for the tide. When I got back to the yard I made a quick set of turn buttons to be sure that the thwart didn't kick out from under me, tied off the oar lock horns, and in she went.
I purposely kept the event low-key. I have been told that it's bad Ju-Ju to do do any kind of a launch "ceremony" more than once. I don't want to deprive Dark Secret's ultimate owner of the privilege of making a production of the launch, should he so choose, so I am referring to today as a sea-trial. One of my co-workers was on site so he operated the fork truck while another co-worker looked on. I would love to have had my wife there, but today is not a holiday for her.
I gathered up some gear (bilge pump, life jacket, anchor, VHF), double-checked to be sure that the water was staying on the outside, and took her for a row. Unfortunately, the longest oars I could muster up are only about 8 1/2 feet. That being said, Dark Secret rows absolutely beautifully. It's pretty blustery here today, and my rowing technique leaves much to be desired, but she goes right where you point her and tracks straight as an arrow. Even beam to the wind (as long as she is moving) she goes where you want. I was going to head for the outer harbor but it was getting a bit fresh for me. I stayed inside and picked up Strider's mooring for a break and a sip of rum for me and Neptune. Incidentally, 2010 is the first time since 1971 that Strider did not sit on her mooring. I got to use it for about 20 minutes this season. The row back up the harbor was dead upwind. I was concerned from the get-go about the windage in the bow. That beautiful sheer line has to come at some price, right? I was amazed at how she stayed pointed where I directed her.
I look forward to obtaining, or making, a right and proper set of oars for her. I was initially thinking 9' would be plenty but I'm not sure now. If anyone in the Cape Ann area has some long oars that I can try, I'd love the opportunity to test drive them and make an educated decision.
She'll stay in the water for the remainder of the week. That will give me a chance to get some photos of her underway, and to stage a nice shot in the marsh for the "Launchings" page in WoodenBoat. I'll be heading to work early every morning to get in a row while it's calm. I think this week is probably the last of the decent weather. When she comes out I'll handle top coats on all the interior surfaces, obtain and install the forward set of oarlocks, and bore the bench and step for the mast.
I am heading back to the yard to get some more pix now that the sun is lower in the sky.
Thursday, September 30, 2010
Sherman, set the way-back machine.
A major milestone...



Fall in New England. It is an unbelievably beautiful time here, filled with things that we expect every year - true to form despite what they have managed to accomplish in recent seasons, the Red Sox have been eliminated from post-season play (anybody, ANYBODY, knock the Yankees out), the air gets crisp, and the customers' boats start to come out of the water for their winter spa treatments.
I have been ridiculously busy. A few weeks ago I filmed an episode of Smart Boating with Paul Jermain. It is a locally-produced show that airs on community access cable channels in the Cape Ann area, as well as a few other places. We had a blast filming it and it aired this past Tuesday. His website is www.smartboatignus.com and there are a twenty-some-odd episodes available for viewing there. Our episode was #85, so it isn't up yet. I am going to see what I can do about posting the video.
As you can see from the photos, I have primed the interior of Dark Secret. That means, for all intents and purposes, the hull carpentry is done!!! HUZZAH!!! There is still a looooong punch list of items to handle, but I no longer need the layout lines and witness marks that have been staring me in the face since she came off the set-up.
The three aft sections of sole are done, complete. I got a few questions about the hole I left in the 'midship sole panel. This was installed so that one can remove a small lift-out to pump the bilge without having to remove any camping/picnic gear stowed on the sole panel. I wrapped up the lift-out today. I still have to bung the two panels either side of the mast step (these are the only panels that will be fastened in place), bevel the forward-most section, and I have to put in the fillers atop the frames between the panels. Once that is done I need to fab and install a hold-down system for the panels. I'm still scratching my head on that one.
Carving the stemhead was a welcome diversion from a hectic schedule. It pales in comparison to Brandon's incredible carving work on his Valgerda, Ravn, http://valgerda.blogspot.com/2010/04/pain-damn-thing.html , but I'm sure I got no less joy doing mine than he did his. I need to shape the aft stemhead (likely a simple ogee) and then I can stain, seal, and varnish the remainder of the exterior brightwork.
All of this brings me to the following point: Come hell or high water - I WILL BE ROWING DARK SECRET COLUMBUS DAY WEEKEND!!! There is still plenty to do before she can be called complete, but the snow will be flying here before we know it. I have to put her in and test her under oars.
I also got a request for a half-model from a boatyard customer. He has had me make a few for him in the past. This one is a J-42, much simpler than the 6-meter I recently did for him. That one was a bear to get just so... I'll dig up some photos of those projects.
Next post goes backwards to show a few shots of the final keel configuration before ballast installation. I don't want to dwell on this, but I got a request for more shots of the final profile.
Saturday, August 28, 2010
It's been a grueling summer...



Sorry I have been away for so long. Last post was just before Memorial Day and here it is a week before Labor day. Where does the time go?
Lots of project work at the boatyard: a stern rebuild on a 33'Bertram, re-glaze the entire wheelhouse (9 large windows)on a Lyman-Morse 53, various and sundry break/fix projects, and regular day-to-day boatyard operations have kept me pretty busy. There is also the work that has been going on on Strider. A complete topsides strip was necessitated by the fact that one could wrap sandwiches in the sheets of paint that were peeling off. It was a bear of a project, but it is behind me now. She sits in the shed, drying out.
Before I get going on the Dark Secret stuff, I need to apologize for the misuse of the term "metacentric height" in a previous post. This will be clarified (I hope) below.
My sincere hope is that this post will forever quash the debate about the keel on Valgerda. I have primarily been using two sources for the data on stability calculations: Chapelle's Yacht Designing and Planning, and Skene's Elements of Yacht Design. Both books talk about stability as applied to larger vessels (closed systems in which items that will affect a hull's stability remain in fixed positions) as opposed to small open boats (open systems in which all moveable items will have some effect on stability). Chappelle talks about stability in a very conversational, "touchy-feely" kind of way. Skene's takes a much more direct and quantifiable approach. It is entirely math dependent.
The short version of the conclusion at which I have arrived is as follows:
1. The height of the keel has a very small effect on the lead casting's contribution to stability. In fact, the difference is negligible. The LCG (longitudinal center of gravity)of the casting, as designed, is approximately 14 1/2" below the DWL at a point about 1/3 of the way between stations 5 and 6. This point is marked on the lines plan by the termination of the arrow drawn from the noted casting dimensions into the casting in the profile view. The traditional keel I have fitted to Dark Secret puts the LCG at 11 3/4" below the DWL.
Here is where the math/geometry gets funky. Pay attention. The 'midship section when the boat is at maximum heel has to have the same immersed area as the section when the boat is at rest. More accurately, the volume of the boat does not change as it heels, so for all intents and purposes the area of any given immersed section will remain constant through changing heel angles. When this heeled section is calculated, you will see that the heeled waterline runs from a point just below the, let's say starboard, rub rail (it better be below the rail; there's no deck) to a point just outboard of the rabbet on the port side. By finding the center of area of the heeled section and squaring up from it until it crosses the at rest centerline, we determine the metacentric height, for whatever that's worth.
Now for the martini shot: by plotting the distance between the heeled centerline and the a line squared up to the heeled waterline from the keel's center of gravity, we are able to do a simple force x distance calculation to see what the lead does for stability. By comparing the shallow keel to the deep one, you will find that the difference is something on the order of 24 ft./lbs. As I said previously, sliding my 200 lb. ass 1.25" to windward will more than make up for any "lost" stability.
2. While we have quantified the the keel's contribution to stability, its primary reason for being is to bring the boat down to its lines. The traditional faerings had heavier scantlings, and were expected to earn their keep by hauling stuff from here to there. In the absence of both of these factors, the lead is required.
3. The very low aspect ratio of the keel as drawn is not likely to contribute in any significant way to windward performance. Period. Make of this what you will, but for me there just weren't enough pros to outweigh the cons when making the decision as to whether to retain the keel profile as designed. Mr. Atkin himself says that windward performance, even with his "improved" keel, will be limited.
By the time I was done at the drafting table the drawings I had were an absolute mess. I have posted a much simplified (and approximated) version of the above math exercise. There is a much clearer explanation of factors influencing stability located here: http://www.codecogs.com/reference/engineering/fluid_mechanics/ships/stability_and_metacentric_height.php
As far as the photos are concerned, all of the parts inboard of the rub rails are dry fitted. Inwales, mast bench, mast step and floor timber still need to be permanently installed. I laminated the mast bench to a slight curve. This is purely for looks. With the strong curves elsewhere throughout the boat, I was worried that a straight mast bench would appear to have a sag.
The mast is glued up, tapered, and eight-sided. The blanks for the remaining spars are milled.
I have been working on the short list of what boat to build next. I'll cover that next time.
And, finally, Brandon Ford has been building a Valgerda of his own out in Oregon. He recently launched her. Check out his blog here: http://valgerda.blogspot.com/
Congratulations, Brandon. Nice work.
Subscribe to:
Posts (Atom)

